Metsa the assembly of a plywood, resin coated core
veneers are placed along with dry wood panels. The
assembled core and panels are then placed in hydraulic
hot press at defined temperature and pressure. when
pressure is applied then resin should penetrate the core
and panel vertically for stronger bonding.
METSA plywood is made with Quadra Press Technology. Due to specific
viscosity resin circulate vertically in core and panel and
provide a super strong bonding between core and panel. Pinewood and comes with 100% Gurjan Face Veneer alongside Gurjan Core Veneer, which are full core & full panel veneers.
STRONGLY BONDED WITH
Metsa Ply with Quadra Press Technology:
- Imported - Gurjan log is best suitable.
METSA PLY Made out of gurjan logs and
- PINE & TEAK log is suitable.
METSA PLY We use pine log
- Minimum 80 hours in boiling water.
METSA PLY It is safe for 120 hours
in boiling water
- Minimum 0.6mm FACE should be used.
METSA PLY We use 0.6mm thickness.
- Full long panel & tenderized core should
be used. METSA PLY we make according to the answer
- If the manufacturing company belives in
quality product then it should give Warranty. METSA PLY We give warranty card to our
costomers and today it is guaranteed for
- Solid contents of PF Resin should be 49%.
Resin must be made in own plant tested
in batches, then used. METSA PLY We have Qualified Chemists and
prepare Resin in our own get it tested
batch wise, then it is utilized.
- Good plywood manufactures shouldhave
license from BIS. METSA PLY IS: 303, IS: 710, IS: 1659,
IS: 4990 Specified.